visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 1722 j 5050 d 2 hf rev a ultra low profile 0805 power divider 50 to 50 description the pd1722j5050d2hf is a low profile, subminiatur e wilkinson power divider in an easy to use surface mount package. the pd1722j5 050d2hf is ideal for high volume manufacturing and delivers higher performanc es than traditional printed and lumped element solutions. the pd1722j5050d2hf is m atched to 50 and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: wcdma, and gsm, the pd1722j5050d2hf does not include the resistive element and therefore, requires an extern al resistor for operation. the pd1722j5050d2hf is available on tape and reel for h igh volume manufacturing pick and place. detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 1700 2200 mhz input port impedance 50 output port impedance 50 return loss 11 14 db insertion loss* 0.5 0.7 db amplitude balance 0.1 0.3 db phase balance 1 3 degrees isolation (output ports) 17 19 db power handling 2 watts features: ? 17002200 mhz ? 19 db isolation (output ports) ? 0.5mm height profile ? 50 input / 50 outputs ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? external resistors required ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing designation output 1 input mid 2 mid 1 gnd output 2 5 4 2 16 3 pin mechanical outline dimensions are in millimeters 6x 0.22 4x 0.65 6x 0.98 orientation marker denotes pin location 4 orientation marker denotes pin location top view (near side) side view bottom view (far side) 2x 0.15 4x 0.37 2.040.10 1.290.10 0.850.08 1 2 3 6 5 6x 0.30
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j5050 d 2 hf rev a typical broadband performance: 500 mhz. to 6.0 ghz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] insertion loss 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 1722 j 5050 d 2 hf rev a typical performance: 1600 mhz. to 2300 mhz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 1600 1700 1800 1900 2000 2100 2200 2300 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 1600 1700 1800 1900 2000 2100 2200 2300 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 1600 1700 1800 1900 2000 2100 2200 2300 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 1600 1700 1800 1900 2000 2100 2200 2300 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 1600 1700 1800 1900 2000 2100 2200 2300 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 17 22 j5050 d 2 hf rev a mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. all of the xinger components are constructed from o rganic ptfe based composites which possess excellen t electrical and mechanical stability. xinger compone nts are compliant to a variety of rohs and green st andards and ready for pbfree soldering processes. pads are gol d plated with a nickel barrier. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the pd1722j5050d2hf is a wilkinson power divid er, external 0402 100 and 200 resistors must be mounted in location s r1 and r2 respectively, as shown in the figure below. pad footprint w/ 0402 resistor locations mounting footprint dimensions are in inches [millimeters] .026 [0.66] 6x .013 [0.33] 4x .012 [0.30] plated thru hole to ground 3x transmission line circuit pattern footprint pad (s) solder resist 6x .014 [0.35] r2 r1
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 1722 j 5050 d 2 hf rev a packaging and ordering information parts are available in reel and are packaged per ei a 4812. parts are oriented in tape and reel as sh own below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . .25 2.41 1.00 8.00 4.00 2.00 1.75 3.50 4.00 1.60
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? pd1722j5050d2hf
|
